This can be used as a wall, and for the wall. Purpose of this product is to lessen the use of of a closet, hangers and storage spaces around the house. It is used to display beauty of the products around the house.
Conceptually, if this is printed as a larger piece it can be used as capsule pods based off the Japanese hotels. It can be a larger storage area, a room, or stairs.
PLEASE: feel free to use this wherever, but give credit where credit is due. Tips and donations aren't required but are greatly appreciated.
NUMBER OF SHELLS = 7
INFILL DENSITY = .18
LAYER THICKNESS = 0.2
MakerBot Replicator+ is best used, so the bottom doesn't warp. MakerBot Replicator can be used, but it may cause warping.
top view side
Line tool - start with 6 equilateral triangles, but do not conjoin them yet.
Extrude - each one to any height, then shell different triangles to your liking.
Join - them together to form a sphinx-like tiling, as seen in the above images.
Add - countersinks. Countersinks will vary depending on the screw you want to use.
If the bottom is too thin for a countersink, add a layer on the bottom by drawing an outline of the shape from the bottom.
You are ready to print!