Unobtrusive (doesn't shine in my eyes) LED strip lighting for Ender 3.
This holds a 10" 12V LED strip (10mm wide) without relying on the adhesive backing. Both left and right supports have a channel for wiring.
The rail which holds the LED strip must be printed corner to opposite corner on the Ender 3 bed. MAKE SURE YOUR CLIPS AREN'T IN THE WAY! as it goes right into the corners.
The photos also include a Bullseye LED for the hotend https://www.thingiverse.com/thing:3242063 and an LED strip behind the x axis, https://www.thingiverse.com/thing:3352272 , so the majority of the light on the bed is from those two LED's. The photo showing most of the printer is in a dark room with all 3 lights on. Much nicer when printing with black filament on the black bed.
Inspired by https://www.thingiverse.com/thing:3140524.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.