This is a pusheen shaped tray for all your pusheen traying needs.
this was originally made to catch pencil sharpenings but can also be used to hold any other items you desire!
took about an hour and a half to print and didn't need any mucking about to get it to work either!
as always i can send you the fusion 360 file if you want to give it a remix =)
this is made from cheap nasty pla from alde (yes the supermarket!) and its actually prity peng!
cost about 12 quid for a full kg roll with no postage cost (well, you've got to go and get it) and for little bits like this its prime!
it seems to be fairly strong and the colours look good.
i ran it at a fairly default pla setting and had no problems whatsoever!
the design process was actually a lot easier than id expected, its all available with a quick google so i wont bore you with the specifics but basically you can get an image from google then make a vector from it using inkscape. then save as an SVG file and import it into fusion!
then it behaves the same as a sketch you've made in fusion with minimal mucking about.
surprisingly easy considering its all on free software!