If you use original Stratos dock - docking process is painfull. Cheap chinese docks are not reliable. That is why I designed my enhancement for original Stratos dock.
Dock in action (V1):
Printed in Grafilon (PLA+Carbon), but you can use PLA, ABS, PETG or what you want.
Print position as it is in STL files. It is important. Do not rotate.
Support Everwhere, use Enable Support Roof/Floor (Cura)
Build plate: Skirt
Model print placement: as in stl's
Printer Creality Ender3 (or any that gives quality prints)
a) After the printing and assembling enhancement dock check first how it holds Stratos locked.
b) If OK - then take original dock and try to press into the enhancement. If you can't just shave a little of the edge inside the enhancement dock. But usually it is enough just to bend it a little along the longest side. No glue needed.
c) Try again to put and lock Stratos in the original+enhancement dock combo. Check that there no gaps from the arms to the stratos arms. There shold be no gap vertically. In other words they should press Stratos to the dock.
d) If no gaps- (This is INREVERSIBLE, blame yourself if you missed something) then cut 4small grips (tooth) on the original dock as they are no longer needed.
That is it. Other parts used are below. And if you happy with the result - you can leave me small donation on paypal: email@example.com
4x M3 (12mm length)
2x M2 (8mm lengt)
Stiff ~6x18mm spring, regular 3D printer hot bed leveling spring will do the job (can find on Aliexpress, for example
C_Main.stl replaced by: C_Main_Stock.stl and C_Main_Universal.stl
Stock - for stock dock. Universal - for stock and roun chinese cheep dock
In action: https://www.youtube.com/watch?v=2CbMjyDywKM
Cheap dock example on aliexpressi: https://www.aliexpress.com/item/A1609-Charger-Cradle-Charging-Dock-For-Huami-Amazfit-Stratos-SmartWatch-2-2S/32914790842.htm
But personally I do not recomend use cheepos. And this one will not give you slide and click feature, it will not work as with original dock.
Tried SIKAI dock from aliexpress do not fit my stand. Surprisingly it is slightly higher and taller. I was lazy to redesign my dock and just shaved some plastic from SIKAI.