Not Lazy Susan shaft adapter
by dustynrobots, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I designed this shaft adapter for the Not Lazy Susan project in my book, Making Things Move (www.makingthingsmove.com). It's designed to fit an old Solarbotics GM9 motor and wheel and allows you to increase the distance between the motor and wheel.
The newer GM9 motor have slightly different dimensions. Check the model against the motor you have/buy to confirm. I found that if I made the part that slides into the wheel .005" smaller in diameter, and the hole the motor shaft slides into .005" larger, I got a nice slip fit.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Not Lazy Susan shaft adapter by dustynrobots is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving dustynrobots a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure dustynrobots would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).