I made a combo case/shell package for this phone and my Osmo Pocket. I was so pleased with it I decided to make a "camera shell" case for the phone itself (it actually has a darned nice camera suite onboard! including 240fps 720p 120fps 1080p and 30fps 4k and true black and white AS WELL AS high speed for the self facing camera! very cool)
So I kind of went crazy. 70 hours later and 5 interactions later and its pretty close to really good. just a few more tweaks most won't even notice!
slap the phone into the shell and GO. you can even use the phone in the case. openings for charge, power button, front and rear lenses and LED's and earpiece (if mic audio is not good drill a little hole where the mic is on the front of the phone but I suspect it will be good enough I can't test because I have no service on this device I bought it for my osmo since the osmo won't work with my DD (LG V20))
that little "fence" on the front? keep your finger below this to prevent it being in the view of the lens.
the hole on the bottom ? that is for your tripod socket adapter.
that one to be exact. it friction fits in like a glove you can choose 1/4" or 3/8"
print both parts NO support. I suggest 3x3x3 .2mm 25% infill grid both ways.
I tried .24mm 3x3x3 and 10% infill grid both ways and it did work but was NOT as clean.
95% extrusion multiplier (flow) on creality machines.
phone friction fits in place and won't slide out unless you are hard core rough with it.
just use 2x M4 20mm bolts to assemble. the bolts and tripod socket will install flush.
deburring tool to clean up the sharp edges. VERY hand and nice. I am going to later work on plugs and attachments to use that "through" hole I designed into it (storage grip extensions etc..)
I am extremely pleased with how well it came out and will be incorporating some of the enhancements I made to this one on my Osmo one as well.
Extrusion Multiplier (flow) to 95% ! nice friction fit of parts. clean.
Deburring tool to clean up edges. 2x M4 20mm bolts to assemble.