The model from @Mr_Clever_Coyote wasn't scaled correctly so I corrected it. Also removed the inscription for aesthetics reasons.
The thing is quite efficient and easy to print, so don't hesitate.
- Take off only one screw from the power supply fan and use it to screw the printed part in place
- Pivot the printed part to reach the second screw
- Take the second screw off and screw it back with the printed part.
This way the fan is always hold by at least one screw and won't fall into the power supply case.
Jun 30, 2019
It looks like on the newest model they use 9.64mm ATX fan screws rather than 11.77mm which is the standard. If you are making this on a 2019 model you may need to get some PC fan screws since the ones provided will be too short for the new shroud and the fan.
Happy printing !