Here is a lithophane for a Siberian Husky
I am now uploading two versions.
- No Base: It has a 3mm thickness and a 3mm border around it.
I have had issues with my print not staying stable and wobbling a bit towards the top of the print.
- Has Base: It has a 3mm thickness and a 3mm border around it. Add a base of 7mm which makes the total base of 3mm (thickness) + 7mm (base added) = 10mm
The inclusion of a base has benefits;
My printing dimensions;
Thus, if the width if 120mm, then the height I use would be 90mm.
I like printing my pictures standing up, I personally think it looks better. I tried printing a image flat....it looked very very bad. I personally will not try it again.
I suggest using 100% infill to remove as many air gaps as possible, you do not really use much material anyway.
- You should use a brim to print this, I tried a raft but because the image is tall, it was not able to stand up straight and the print failed.
I am the owner of https://www.neocrisis.com