This is a task light I designed to help with lighting on some small projects.
This is designed for a 1 meter length LED strip and sits about 30 degrees off the vertical so that you can get closer to the item being worked on without blocking the light.
You will need to print all the files once, with the exception of the top mid file which will be printed 3 times. The 5 total arc pieces slot into each other, however you will need to glue them in place, the two bottom sections do not need to be glued.
You may want to add some rubber or some sort of non slip material to the bottom of the base pieces.
Supports required for the arc pieces only.
50% for arc, 20% for base