Designed to be an upgrade from a minimalist credit card holder. I liked the minimalist style of the credit card holder but was frustrated with having to carry coins in my pocket, so I designed an upgraded version to encompass £5 worth of UK coins (1x £2, 3x £1s) as well as a flat multi tool.
My aim was to maintain the style and functionality of the original minimalist card holder without increasing the bulk and weight too much.
Added photographs of the multitool detail. Links to the multi tool are below, but this style of wallet multitool can be source from many places on the web as long as the nominal dimensions are 70mm x 45mm x 2mm it should work.
Amazon UK: https://goo.gl/igQJPT
Amazon US: https://goo.gl/vWDahu
Ebay: search for "11 in 1 Multi tool wallet"
3D Hero PLA
1a. Upper Coin Body - Print flat, no support
1b. Coin Body - Print flat, no support
1c. Card Body Right - Print flat, no support
2a. Tool Body Cover - Print flat, no support
2b. Tool Body & Clip - Print vertically, with supports.
2c. Card Body Left - Print flat, no support
The left & Right Card Bodies have 7 1.5mm holes that need to be taped with M2 x 0.4 tap.
Very strong flat elastic is used to secure the 2 card sections together. This will need to be salvaged from a minimalist wallet or made by sewing together 2 elastic strips (see photographs)
- The components are secured together in 2 groups of 3 parts with 14x M2 x 0.4 x 8mm countersunk hex screws.
Wallet Body Right
1a. Upper Coin Body
1b. Coin Body
1c. Card Body Right
Wallet Body Left
2a. Tool Body Cover
2b. Tool Body & Clip
2c. Card Body Left
- The multitool compartment may need some light sanding on the vertical faces adjacent to the screw holes to achieve a good fit.
Tools: M2x0.4 tap set, 1.5mm drill, allen(hex) key, 14x M2x0.4x8mm screws
Designed using Fusion 360 & sliced using Cura.