I really like the model of Another Dice Tower V2 but like many others I struggled to find a suitable bottle. So this is my attempt at an alternative.
Instead of a bottle I created a 3D printable wall that fits the original model. While you loose the transparency (even when printed with transparent PETG like I did) It imho matches the look of the tower quite nicely. I also added a few windows so there is a minimum amount of "see through". Since the wall is thicker than a regular bottle would be I also had to create a custom crown to make it fit. Even though I tried a non-transparent version I like the transparent one better. It looks kind of cool and it's a lot brighter inside.
It should be printable without support or brim/raft (worked well for me at least).
Please note: This model is scaled to fit Another Dice Tower V2 if you want to use it for Another dice tower you will have to scale it down. After breaking the top part due to incredibly thin walls I reprinted the V2 version from Another dice tower by scaling it up to 103.4%. Since this seems to have worked the correct factor to scale this model down should be roughly 96.71%. I have not tested this though - if you do please let me know if it worked.
I used 5 perimeters in Slic3r since infill would have looked ugly with transparent filament.