LCD 10.1" case
by delavar, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Case for 10.1" LCD from ebay
Everything printed on Ordbot in 200x200 print volume without support.
Update 24/07/2014: Added solidworks models
LCD10FrameTop printed diagonally.
For the frame you need
2 x LCD10FrameTop,
2 x LCD10FrameSide,
1 x LCD10FrameBack
These parts mounted with 1.4 x 6 mm self tapping screws. Optionally you can mount LCD10FrameBackHolder (drilling is required) and LCD10FrameStandSingle
For the boards you need
Boards just slides inside the case. The small board fixes with sliding LCDBoardcaseHolder after sliding the board.
Case can be mounted with
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
LCD 10.1" case by delavar is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving delavar a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure delavar would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).