Just some towers to test how gradients turn out. They come in two heights, feature groves which represent 10% steps in the gradient and a small indicator for the axes origins.
Contains Gcodes for the Geeetech A10M.
Approximate printing times and weights:
- Normal tower: 30 minutes, 5 grams
- Short tower: 15 minutes, 3 grams
In Cura (or any other slicer) set the bottom thickness to 1.2 mm and turn on the vase mode so that the print spiralizes at one layer after the base plate. That way you get a pretty fast and lightweight print. The contained Gcodes are prepared this way. You could also slice the towers yourself "traditionally" because the main settings happen at the printer as following:
Start gradient: 100% / 0%
End gradient: 0% / 100%
Start Z: 5 mm
End Z: 105 mm (normal tower) or 55 mm (short tower)