Loading
mikbund

sensor box

by mikbund Jan 7, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

I’m curious about how you kept the D1 in place.... when I print it it sits nicely in the tray but seems like it will bounce around d lose once the top is in place.

Hi

There are tolerance differences between printers and PCBs. The wemo cards I used was just press fit. If you experience issues try reducing the size a bit to accommodate for the tolerance difference.

Hi.

Are you sure the the sensors have different sizes? The link is for a dht11
https://m.aliexpress.com/item/32690292120.html?pid=808_0000_0101&spm=a2g0n.search-amp.list.32690292120&aff_trace_key=257d197a7e904217b0cd89bbd7e77767-1535045495676-03832-bgHWx1Ku&aff_platform=msite&m_page_id=1645amp-8unV30TH8jWxHIYx7qL0Ag1549742512006

The only difference is price and precision? Can you send me the measures and picture of the sensor, then I should be able to refit the hole.

Hola.
El sensor que uso yo es este. https://www.amazon.es/SODIAL-Temperatura-humedad-relativa-Arduino/dp/B00K67YK6M/ref=sr_1_20?ie=UTF8&qid=1549735710&sr=8-20&keywords=sensor+temperatura+arduino

muchas gracias por tu ayuda. Tambien sería interesante que tuvieras el mismo modelo para diferentes sensores como puede ser el de movimiento

Hi

I have been looking at it. There is not room for it without moving the screen, which would put it off center. And it is to much for me remake it in a larger version.
I would recommend to just solder the DHT sensor the wires, which is what I did. If you like, I can share the fusion360 files.

Hola.

Antes de nada agredecerte por intentarlo. De acuerdo, si puedes compartirme los ficheros. Otra cosa, que esp usas? el esp-01, el esp12?

Un saludo.

Hi again

Here are the files - sorry for the delay. I have used fusion360, so you should be able to import them.

Please share on thingiverse if you make changes other could have use of. Also I would be glad if posted pictures of your prints / finished product.

Happy printing :)

Hola.

Muchas gracias de nuevo, si agregare fotos en breve de mi impresión.

un saludo. =)

Hola de nuevo. El diseño ha quedado genial ya lo he impreso y genial. Podrías modificar el modelo para que funcione también con el dht11?
Estaría muy agradecido.

Un saludo. y muchas gracias de nuevo

Hola, me gustaría saber que oled usas¿Me podrías indicar el nombre?

Muchas gracias por tu respuesta, comprare uno e imprimiré tu diseño. De nuevo muchas gracias.