I fixed Eigengrow's modified power supply silencer so that the holes are the correct diameter for the stock screws (as pictured). I also reduced the thickness of the mounting points because the stock screws are not long enough to go through the mounts and still secure the fan properly.
• 2019/01/24: I have added a mirrored version that will work with the Mean Well LRS-350-24 power supply.
• Be sure to install the fan duct one screw at a time, starting with the upper left one then rotating the duct up so that you can access the second screw.
• Do not remove both screws at the same time otherwise the fan will fall off inside the power supply.