So I was browsing for dice tray's, and really wanted one which has a spot to display your miniature when out of combat. Somehow, I couldn't find one so I decided to model one myself!
If you're crafty, it might be worthwhile to place some felt in the dicetray.
This is my first 3D Print model, and I'm pretty happy with the result. I feel like making more!
Consider a visit to my patreon for other 3D stuff: http://patreon.com/Feroxxy
Settings can be tweaked.
I made a speed print with a resolution of 0.24mm with print speed 80mm/s . This took 8,5 hour and 114g of 1,75mm PLA and while on some places the seams between stones got a bit washed out it's still pretty clear 90% of the print.
With infill of 10% it already feels incredibly sturdy.
Supports: There is a small overhang at the tower, however at my print speed the first layer didn't collapse that much. Add local supports if you're feeling safe.
raft: I printed with a brim of 20 lines, but I'm unaware if it really mattered.