This is a gas cap and base for the Redcat Gen 8 International Harvester Scout II scale crawler. The base attaches to the Scout body, then the fuel cap screws onto the base.
Additional hardware needed:
1pc: M2x8mm cap head screw
To install, you will need to drill a 2mm hole through the body in the desired location. Using the M2x8mm cap head screw, first install the printed washer onto the screw. Next, insert the screw through the body from the inside, and thread on the gas cap base until it is tight against the body. Now, thread on the gas cap to the exposed threads until the cap is snug against the base.
Redcat parts on Thingiverse are released under the Creative Commons License Attribution- NonCommercial- ShareAlike 4.0 International (CC BY-NC-SA 4.0).
We want to share these parts with the world, and we want to inspire people to make and share their own parts for their vehicles.
In keeping with the non-commercial clause of this license, if you produce this part (Gen 8 Gas Cap V1.STL) + (Gen 8 Gas Cap V2.STL) + (Gen 8 Gas Cap Base.STL) + (Gen 8 Gas Cap Spacer.STL) for others, you may not receive compensation in excess of $0.15 per part, plus your shipping costs. This number is calculated based on an average estimate of material cost and machine running costs.