Inspired by Kabab FPV transformed my UR65 in to a super whoop.
ive designed two frames for both 55mm props and 65mm props, (please note if your using a ur65 motors keep in mind that the prop size is 0.8mm and most common props at these sizes are with a 1mm prop shaft hole! I simply use a blob of hot glue in the prop hole and slide it on. if your converting anything else with the next size motor you will be fine as the shaft will be the desired 1mm)
55mm prop frame
65mm prop frame
55mm prop set
please feel free to drop me a comment or remix this as much as you like!
you could print this in PLA however i do not recommend it