1/2"PVC antenna kit that is simple to print!
The OD of my PVC pipe was 21.8mm so make sure to double check. the length is 6'6"
Run screws through the PVC pipe to act as the main attachment!
This base is used to simply add extra strength for windy conditions.
The cap just pressure fits on, it is only to keep the bugs and water out.
the underside of the base has a cutout so you can attach your cable where it stays out of the elements for longevity. I used a long strand of copper wire as the antenna and low resistance solid core wire for the transfer cable.
Use several walls and top/bottom layers for extra stiffness!!!
Make sure to also run screws through the PVC pipe for safety