Print Speed 60mm/sec
If there is no RAMPS cooling fan, please use PETG or ABS.
- Connect Arduino MEGA 2560 + RAMPS v1.4.
- Attach 1 to this panel and fix with M3 screw.
- Secure the RAMPS panel to the stepping motor with the M3 screw.
- Connect DC 12V and connect the wires.
Arduino MEGA2560 Clone connector positions.
Arduino MEGA2560 Clone is not a same connector position.
If your MEGA2560 or MEGA2560 clone is not match the connector hole,you might change the hole position use RampsPanel.3mf CAD file.
The upper one is Hiletgo version.
The under one is OSOYOO version.
This STL file is Hiletgo version.
RampsPanel.3mf CAD file.
3mf file is a easy customize.
1.Open the 3mf file with Windows10 MS 3D Builder free CAD software.
2.The red part move to correct position and remove it from the green part.
3.Save the STL format file.
4.Print the customized parts in the 3D printer.