I decided to make make a flully 3d printable brush design that can be adapted by future designs.
In this first batch of brushes I will release a Bouldering/Climbing Brush, a Nail Brush, and a small Test Brush.
The brushes print in about 4 hours, (test brush around 30 min).
Use a 0.4 mm nozzle(and 0.4 mm line width), and 0.2mm layer height.
Please watch the video for more information!
Feel free to leave any questions or comments!
Link to bouldering brush
Check out the Bouldering brush v2!
Check out my social media for sneak peaks and memes:
Woo Hoo! BOW! Thankyou!
- ConfusedPrinter Found that when printing with PETG, one has to use the cooling fan to get reliable bridging. - More testing needs to be done to find the perfect fan speed, however at 100% fan speed the print definitive succeeds!