This is a Hybrid between the Hypercube Evolution and the Hypercube Fusion.
Reason for this Build:
I had converted my Hevo to the Hypercube Fusion but i hated how picky the Alignement of the MGN Rails were but i loved how rigid the X Axis was so i tried to combine these two.
Motormount Change (optional):
Made the Mounting plate for the Nema 1mm thicker and moved the Motor itself 2mm further away from the 3030 Rail and added a 4th Mounting hole for the Nema Motor
3 Point Mount with 3x M3x10 Screws
E3D V6 Mount will be added later, but its easy to convert existing Hevo Mounts, just add 3 new Holes.
BOM difference to the Hevo:
more details and pictures later
My first EFusion Cube: (100mm/s 2000ACC 10Jerk)
Small adjustments, a bit tighter fit for the Rail
Changed the Slider so the Belt can be Twisted.
Added a Ridge for LM10LUU for easier Alignment.
A F695ZZ Variant will hopefully be done in the next few days.
Added F695ZZ Version of the Y Sliders and Idlers.
8x M5 Spacer 1mm
does not matter PETG/ABS
does not matter