Top enclosure for Ultimaker S5.
Protects your printer interior from dust and helps to improve temperature conditions.
This is a remix of: https://www.thingiverse.com/thing:1181123 (thx for the basic idea)
What you need:
Acrylic glass plates:
2 x (468mm x 250mm x 5mm) for front/back
2 x (391mm x 250mm x 5mm) for left/right
1 x (468mm x 381mm x 5mm) for top
Screws + nuts:
24 x (M4 x 20mm) DIN965
24 x (M4 nuts)
4 x CORNER_UP_IN.stl
4 x CORNER_UP_OUT.stl
6 x CORNER_DOWN_IN.stl
6 x CORNER_DOWN_OUT.stl
The measurements for drilling the holes can be found in the pictures.
If you like, you can do the cut out smaller. Used 100mm x 100mm just to ensure that the bowden tubes have enough lash.
Thx and maybe someone finds this helpful :-)
As filament use what you have in stock. Think most materials will do the job.