V-king CoreXY - Pro 400 independend belt adjusters.
Original design can be found here. https://www.thingiverse.com/thing:2921021
Uses M3 or M5 belt idlers.
Can be used on other 20x20 mm core xy rail systems.
Needs two toothed idlers and two smooth idlers.
Printed in PETG with 0.6mm nozzle 0.3 mm layer 25% infill.
Enjoy and rework if needed.
You can use your original V-King XY belt forks for this design too to reduce possible cantilever effect (which not exist in my design sofar)
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.