Loading
Alexby

Dodge Ram Late 80s

by Alexby Jan 19, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

How come you recomend print the cab 5-10% bigger? What didnt you like about the fit?

My friend, how do you print it? I tried in cura but they position very wierd, do you use supports?

Is the bed bulk head file the front of the outer bed panels?

Increible trabajo, tengo en mente imprimirlo para mi TRX4 a 324mm de ejes, seria un detalle fantastico el diseño de lentes mas reales para alojar leds de luces, es lo que le falta y un lujo, gracias por tu maravillosa aportacion.

hello, do you have the rear lights bucket? thank you

One of the tail lights is missing mate

Thanks. Let me take a look and see if I can find it. In the mean time you can use your slicer to create a mirror of the other one.

Hello, first I want to say this is awesome. Second, Do you have the bed in one piece? I see one side that's completely together and the other side that's in a couple pieces. Can you upload them together as one?

That one piece is up there by mistake. But you can mirror it in your slicer and it will become the other side.

How much material does it take? It looks awesome, I am just concerned about it taking too much material.

just finished printing the whole truck bed stock, managed 3 pieces but when i finished the bed i noticed there were no tail lights for the bezzles... any one make any?

Do you mean the flatbed or the stock Dodge bed? I do a similar thing for both. With the flatbed I glue some white styrene behind the bezel and print out some decals or stickers that are photos of rear tail lights and lay those in there and then put a drop or two of epoxy to make the lens. With the stock bed I would do a similar thing but probably just clear coat for the lens as the epoxy wont be happy with that corner.

Comments deleted.

Hahahaha. Thank you!!!!

thank you for all these nice bodies . cant choose anymore .

does any one have the bed done as one piece? i wanted toline it up in mesh mixer but its a headache and hoping someone already went through it successfully
** edit one file is half th be im lookin for but shes just shy of being too big for my printer and how i want it to print

Is it possible to share also the diamond plate for the flatbed?
i would realy appreciate it! :D thumps up for the amazing job you did!

ok, i founded, its not here but included in the our uploads for flatbed!
sorry for the mess!

whats the length width and the wheel base on this sick looking truck

The wheelbase is 305mm. Wash shooting for 313mm. Not sure where that got screwed it up but I printed the cab and I'm making it work but I wish it was 4% bigger. Size up if you're making it for Axial SCX10.

Wow, very cool design. Planning to print this in 80%, so it fits on my ECX barrage. Can you verify the original wheelbase of 313mm?

Yep, That should work. I’ve been printing it out and glueing the parts together. I’m gonna run the flatbed and the sizing looks spot on at 100%

Thank you very much!!!!!

You’re welcome. Hope it works for you. I’m printing it now.
I have a surprise I’m about to load that goes with the truck.

This is seriously amazing well done and thankyou