I remixed Campy's fan shroud [thing:2567051] to fit my BLTouch sensor, as I use another stepper mount for my printer.
This design should fit any 3D printer with a Titan Aero extruder.
Here are my Marlin settings:
#define MIN_PROBE_EDGE 30
//my heatbed would crash with the frame if lower (test with your own printer for perfect setting)
#define X_PROBE_OFFSET_FROM_EXTRUDER 29 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER -18 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]
I have my Z_PPROBE_OFFSET set to -5.15. You should definitely get your own Z value as it can be different for every nozzle.
PETG, ABS or any other higher temp material
I used 3 perimeters.
The Filament is Leuchtorange from DasFilament.