Samsung Galaxy S2 Dock
by churchi, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Dockingstation for a Samsung Galaxy S2 (and similar phones)
Print all 3 parts (Dock1.stl, Dock2.stl, Platte.stl).
Glue Dock1.stl and Dock2.stl together.
Insert the micro USB cable into the small rectangle of Dock2.stl. Perhaps you have to widen the hole - that depends on your connector... Best way is to glue them together.
Insert the Platte.stl into the 2 rectangular holes in Dock2.stl.
By moving the Platte.stl more or less into Dock2.stl you can modify the angle of your phone. Take care, not to stress the connector of your phone...
Perhaps you have to glue them together too when the angle is correct.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Samsung Galaxy S2 Dock by churchi is licensed under the GNU - GPL license.
What does this mean?
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving churchi a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure churchi would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).