Loading
Vokamis

Amiga ACA500plus Enclosure

by Vokamis Jan 21, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

Don't print this case. It's a waste of filament and time in this version. Sorry!
1) the screwholes on the base have different diameter
2) the screwholes on the base are not in the right position (down-left= perfekt, the other to are 1-2mm to much left)
3) the hole for the reset button on the top is to much right (2mm perhaps)

Thanks for the fast help. Your idea is good. I will try it.

Hello,
current the best design for an modern ACA500plus.
What is the best direction printing the top? Rotate y-axis -13,50grad?
regards

Hello Millenniumpilot,

What had worked best for me was having the side noted in the attached image be the base. The actual rotation values I forget. It is certainly not the quickest method, but did yield good results.

Thanks for looking and your kind comments!

This is the best design for an ACA500plus on thingverse. Do you think you could make it longer for an accelerator card and VGA port? Also clear filament would be sweet, or some translucent color.

Hi BimerBob,

The back of the current design was left open for expansions. What sort of accelerator card and/or VGA port did you have in mind? It could be as simple as extending the baseplate.

Thanks for looking!

Nice Gold-Filament. Which brand is it?

Hi Timberland,

HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Gold

https://www.amazon.com/dp/B00MEZEFVO/ref=cm_sw_em_r_mt_dp_U_LH4tCb5YG6WY6

Thanks for looking!