My mini amp looked lonely, so I decided to make a matching guitar for it! The model is a scaled down version of a fully functional guitar I'm working on.
There are two fretboard versions, one with the frets in place, and one to be used with separate frets (I used 1.2mm steel). For the humbucker, I used silver 1,75mm PLA to fill the holes, and then sanded it to give the proper look.
Total length 360mm, prints in pieces and is meant to be glued together. All the parts are oriented the way I found works the best.
Check out my other designs here: https://www.thingiverse.com/Superbeasti/designs
das Filament PLA
Use rafts for the smaller parts and the fretboard.