This Eachine E010 Frame is designed for improved speed and general responsiveness. One thing to note is that your props and FC are exposed so you may see wear on these parts more then original frame. I would suggest to print this with PETG or PLA plastic. Depending on your printer you my have trouble printing this in PETG as it is a small item to print. The frame in the photos above were made with PLA plastic.
Generic High Temp PLA
Make sure to print the frame with battery holder side facing down. As this my help your printer to print the screw holes at the top.
If motors don't hold in there sockets or are to tight. Just apply heat to the socket and make the necessary adjustments.