THE PHAGE 434 CRO/OR1 COMPLEX AT 2.5 ANGSTROMS RESOLUTION
DOI: 10.2210/pdb3CRO/pdbNDB: PDR001
Organism(s): Enterobacteria phage 434
Deposited: 1990-07-06 Released: 1991-10-15
Deposition Author(s): Mondragon, A., Harrison, S.C.
STL Prepared from UCSF Chimera with surface grid 0.1 Angstroms.
STL was then repaired in IdeaMaker.
4 files are set to common XYZ origin.
Sliced for color printing with the Mosaic Palette 2 using Canvas (canvas3d.io)
Yellow, Fluorescent Green, Red, Orange
24 hrs to print.
0.2mm layer height
0.8mm shell thickness
30 mm/s speed (20 mm/s outer perimeter)
0.4mm extrustion width
4mm Retraction distance
30mm/s Retraction speed
2mm Retraction threshold
0mm Wipe distance
0.4mm Z-lift distance
20% Infill, cellular style
205C nozzle temp
60C bed temp
Transition tower (defaults)
Skirt On - 5 rings
Raft On - 15mm/s first layer
Support Density - Fine
vertical gap from part 0.2 mm
horizontal gap from part 0.2mm
horizontal inflation 1.6mm
Create dense interface above support - on
Create dense interface below support - on
Cooling - fan on 100% after 2 layers.
Support removal and smoothing
Supports removed with side cutters, fine work with a hobby knife.
Small steel wire brush, then a small nylon bristle brush.
Heat smoothed lightly with a Weller Pyropen.