This is a JIG to be attached to a Dremel Rotary Tool and used to sharpening Knifes.
It complies the mosto common sharpening angles on 2 pieces (17/25 degrees and 14/20 degrees) so you can print the one is mostly suitable for your use.
The models are already scaled to 101% of the original model, in order to guarantee a perfect fit to Dremel Tool after som material shrinking.
35% (ABS or PTEG) or 45% (PLA)
No supports needed.
- Depending on the adhesion of your material and machine you may need a raft.