A workbench hand tools organizer, focused mainly on storing small hand tools used in model-making, 3d print clean-up, and electronics prototyping.
Can be mounted on fzr400's Lazy Susan, for easy tool access.
Features a top area intended to hold mbeyerle116's Tool Carousel, as show in the pictures.
See drawing for details of print and hardware parts needed. Note, the main body is a fairly large print.
List of Features / Compartments:
10 13.5 Diam x 58mm deep tool holes, with 3 additional holes possible using the optional well plate. Works well with these testubes and my test tube X-Acto Blade Holders.
14 34 x 4.85mm sq holes for hand files.
3 149 x 41.8 x 21.66mm draws with racks for Dupont jumper wires (also available w/o the racks).
6 2mm holes, creating a rack for X-Acto blades (use my M2 Thumb Screws to secure them).
6 hooks for pliers, 95mm max height to the pliers fulcrum w/ lazy susan, 80m w/o (can probably only hold 2-3 pliers at once, but there should be space for other things on the remaining hooks).
2 81 x 21 x 35mm horizontal holes for general storage.
2 36.7 x 23.66 x 25mm vertical holes for general storage.
1 61 x 52 x 23.66mm vertical hole for general storage (covered up if you use the optional well plate).
1 81 x 52 x 28.66 vertical hole for pens, etc.
1 83 x 75 x 57mm horizontal hole for general storage (works great with cnc bits packs ).
1 130 x 47mm flat plane for general storage.
- 1 75 x 83mm flat plane for general storage or to hold Tool Carousel.