The other half never puts her jewellery away and prefers to sling it all in a small bowl at the end of the day. She then has to fish out the items she needs the next morning.
So, I made her this organiser tray array that consists of 17 little compartment trays all joined together.
It probably has other uses like for small components, nuts, bolt and screw etc.
It prints as one item and doesn't need any supports.
It is about 240mm wide so you'll need a print bed that can print up to 250mm wide.
The print time was about 16 hours with 20% infill and used about 60m of filament.
Cheapo Cr*p from ebay :-) PLA
White (Don't use Lime Green or the wife will moan)