A 50 round reloading tray inspired by the ever popular Frankford Arsenal Perfect Fit reloading trays. This design is slightly different by allowing the neck of the cartridge to rest in it's own pocket, giving the cartridge more stability when placed in the tray upside down. The stackable design allows for convenient storage. This tray will also stack with the other reloading trays that I've designed!
6.5 Grendel as well as other cartridges that share similar case dimensions such as 7.62x39, 220 Russian, 22 PPC, 6mm PPC, 218 Bee, 25-20 WCF, 30 Remington, 32-20 WCF may fit in this reloading tray, though the recessed neck pocket may not work with all cartridges.
Print with PLA or some other filament with high dimensional stability/low shrink factor, and a decently tuned printer is highly advised, as the tolerances are fairly tight.
I used PLA to print this. The tolerances around the cases are pretty tight, so the use of a filament with high dimensional stability/low shrink factor is highly advised.
Recommended infill is 10% honeycomb pattern. Do not use less than 10% infill with the honeycomb pattern. A higher infill percentage can be used if desired, but print times will increase.