Bracket for vertically mounting 20x10mm aluminium extrusion profiles to IKEA cabinets using the existing pilot holes.
The brackets were originally designed for an IKEA Stuva cabinet, but will theoretically fit on every other cabinet with 32mm hole spacing. The only difference between the cabinets you need to be aware of is the diameter of the screws. For example: Stuva and Besta use 3mm screws, PAX and Billy need 5mm screws.
Inheritely fits for profiles with a length of 300, 600 or 900mm.
For everything else you need to add or remove 32mm length for each hole you want to skip.