My dishwasher ruined one of the silicone feet of my Farberware® Classic Series 12 " x 15 " Nonslip Glass Cutting Board. Here is an original re-creation of that corner feet. I used ABS to print it and fits great. The original ones are silicone (for non-slip effect) but the board is still very stable ind doesn't wobble. If someone has success printing on a flexible material, I'd love to hear!
The farber_feet.stl file is ready to print, should be straightforward to use, and it fits the 12 by 15 inches board.
For dimensional customization, the ferber_feet.scad file is the easiest way - just tweak the scale parameters.
For further customization, or if your board has a different curvature, the .sketch file is provided. The workflow is:
farber_feet.sketch --> (Interior,Exterior).svg --> (Interior,Exterior).stl --> farber_feet.scad --> farber_feet.stl
Note: Farberware® is a registered trademark of Farberware Licensing Company, LLC. - the use of this trademark in this design is a nominative fair use covered under 15 U.S.C. § 1125(c)(3)(A)