Loading
thruit00

CTC Upper Corner Fillers - Case Upgrades

by thruit00 May 22, 2014
Download All Files

Thing Apps Enabled

Please Login to Comment

Thank you, but this did not fit my Monoprice Architect, althouth the case looked nearly identical.

Are these the dimensions of the front top right corner for you as well?

I took the original open source 3D model of the makerbot replicator 1 and reversed it to generate these corner fillers. These resulting models fit all my ctc creator and flashforge creator printers. Your printer seams to have modified shapes of the external shells compared to the original makerbot design.

Theaw look really good.

Only problem is on the ctc the wood joints (The two bits of wood from the front that slot into the side) stick through slightly.

These corners push these back through slightly separating the two sides.

Production shapes of the ctc seams to differ slitely depending on the production date. These fillers match exactly the original makerbot replicator 1 open sourcce model and they fit 3 of my ctc replicator dual perfectly (and 2 other printers I have). I'm sorry they don't fit yours!

Would it all be possible to get the original design files for this? My CTC has different thickness panels in the front, back and sides and none of the corners seem to fit. I'd scale them but that obviously throws off every other measurement as well.

I don't offer any 3D models but in this case you can simply create them on your own. Just download the open source 3D model of the makerbot replicator 1 here in thingiverse. Now open the comolete buildgrpup of the printer and create an inverse model of one of the upper corners. That's exactly what I did. This is a 5min job if you know what you are doing.

Thank you. I once found fillers like this but they also attached in the front but I can't find them again. Have you seen them on here?

I think I have never seen the thing you are searching jet, but to be true I don't even know what you mean by 'but they also attached to the front'?

it screws to the sides and front, so the attachment holes go off in each axis

Thank You Very Much, This was a huge improvement for my Printer!!!!! You are awesome :) AWESOME DESIGN well done AWESOME thanx