This model is holder for a (small) laptop, which can be attached to VESA-compatible mount, like monitor stands and arms.
This particular design is for laptops measuring up to 215 mm in depth (when open) and for VESA 100x100 mound. But the OpenSCAD design is parametric, so you can modify the sizes as you wish.
You need to print:
lvm_base_150x180_sqr_nut.stl, depending on if you want to use square or hex nuts for your set screw.
In addition, you need:
- Two M4x25 machine screws with inner hexagon as set screws.
- Two M4 nuts (square or hexagonal, depending on your choice. I recommend square nuts, because they hold better, but are not as easier to get.
- Four short M5 screw with hex head and four M5 nuts to attach the contraption to monitor arm.
You may want to add some rubber feet to the arms to prvent laptop from sliding and falling.