Thingiverse is currently experiencing issues related to search. We are currently investigating. Thanks for your patience.

Loading
Scnd_edition

608 Bearing Roller

by Scnd_edition Jan 29, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

Thanks for these. I did have to make the hole slightly bigger diameter as the bearing wouldn't fit in to start with but once that was sorted they worked great. Very good thread.

Uploaded the customizable version of the roller and added .1mm to the allowance for the diameter of the bearing. That should give a bit more wiggle room for getting the bearing to fit in the male side of the roller.
https://www.thingiverse.com/thing:3421224

Bearing Roller (customizable)

Thanks, glad it helped. I'll clean up the variables and upload the OpenSCAD file to make it easier to change allowances. My bearings took a bit of force to get in to the male side of the roller, but I also used PETG, so the shrinkage and warping may have been different than PLA (if that's what you used)