while installing my dampers for my Ender 3 Pro i noticed i got those pressed gear stepper motors.
It seems Creality is using those one on new printer.
The x stepper motor has a full height of 51 mm.
The y stepper motor has a full height of 56 mm.
My dampers height is about 5-6mm.
So i came to the best solution:
Im using the Y stepper motor with installed dampers on the x axis.
Using the x stepper motor on y axis but removing the pressed gear like people did:
for example (this is not my video) and using my own selfprinted gear wich can be added to the stepper motor with a hammer.
I did not test this one at the moment, but will do until got some free time.
If you got better idea-improvment please let me know.
Rotate 90 degrees.
~4g, 1 hour