This is a roof rack for the Redcat Gen 8 International Harvester Scout II scale crawler.
Additional hardware needed:
4 or 8pcs: M3x8mm button head screws
4 or 8pcs: M3 lock nuts
To install, you will need to drill four or eight 3mm holes (depending on if you want to use one or two screws per corner for mounting) in the desired location. Insert the screws through the rack first, through the body, and into the lock nuts on the underside.
Redcat parts on Thingiverse are released under the Creative Commons License Attribution- NonCommercial- ShareAlike 4.0 International (CC BY-NC-SA 4.0).
We want to share these parts with the world, and we want to inspire people to make and share their own parts for their vehicles.
In keeping with the non-commercial clause of this license, if you produce this part (Gen 8 Roof Rack.STL) for others, you may not receive compensation in excess of $1.50 per part, plus your shipping costs. This number is calculated based on an average estimate of material cost and machine running costs.