The ORI-CAR-MI or 'Ori-car' for short is a fun little print for anyone to enjoy! Utilizing elements such as living hinges, material thickness, a few extra non-print materials, and some clever designing this print is a fun one!
The Ori-Car derives it's name from Origami...obviously! The flat-fold design of the car is what makes this print unique!
Some extra parts will be needed for the full finish...however this can be made all your own.
(x4) #14 O-rings, (x2) 25mm or (1"appx) Wooden dowels with a thickness of 5mm or (.25"appx).
Super Glue WILL BE NECESSARY.
I hope you all enjoy this little creation of mine! Steps and some final shots are in the pictures provided! (Apologies for the rotated Construction images...Couldn't be bothered honestly!)
Solid (for body) 25% Triangles (for Wheels)
Printed in PLA. 208-215C
Layer heigth - 0.1-0.15 mm
Speed 20 - 30 mm (depending on scale!)
2 Perimeters, SOLID INFILL for the Body. Wheels can be 25% or less.
I used glass for a smooth finish, however any print surface should work.