The platform can be either used to just cover-up the under-part of the stock Extruder box, or like I did install self-adhesion LED-strips and wire them up. There is sufficient play to install little rubberrings to avoid vibrations from the fan.
The cable holes are designed to fit standart 1,27mm Pitch Dupont-cable.
The 4.8W LED-stripe I used is quite bright… I placed a 990ohm resistor on the + wire to reduce brightness and reflection on the print-bed.
Have fun building!!
Would appreciate some fotos of your builds =)
..you might have noticed that there is an addicional gap on the .stl file.
This is an update I had to make as the missing gap on my first design blocked the hight of the turbo-fan. (Foto nr. 5)
1st photo is with the 990ohn resistor
last photo is with the stock LED-light.