Airsoft A&K Mk46 Replacement Upper Rails

by hummermole Feb 4, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

Hi, Nice works ! Can you do a Famas version ? ^^ Ty.

I don't have a Famas to take measurements off and use as a fitment model. I only own airsoft versions of US guns, so anything outside of 1911s, M4s, M60s, M249s etc. is outside my wheelhouse since I don't have an actual piece of gear to help me model the part.

That said, I COULD do a Famas version, but I would need some exact (down to the tenth of a millimeter) measurements (overall width, width between rail backs, exact location of bolt holes on the side rails, height of top from bottom of rail, etc.). It would be pretty difficult to get it exactly right doing it via distance because you would have to print it, throw it on the Famas, and then post adjustments, etc ...

If you have a 3d printer, the modeling for this is pretty easy to do. There are a good amount of picatinny rail sections on Thingiverse already - you just need to know how to make some holes in the rails and connect the rails together with a thin plate. Really not that hard modeling-wise. I use Microsoft 3d Builder and once you ge the hang of it, building a model like this is pretty simple once you have the measurements.

Ok. thank you for your answer i will check that by myself. Thanks for the tips and keep it up you'r doing a great job !