This mount for the Rostock Artemis leaves the hot end free to sense the bed when doing bed calibration tests.
It is a two-part mount, mainly to make it easier to print. The main part is printed upside down and the centering plate is then mounted on top of it, to center the Nimble on the hot end.
It leaves space for the plugs on the effector and still is stiff enough to hold the Nimble properly.
The mount is developed with one of our customers and has been in use for a little while now.
The STL models are checked and optimised. The parts that need a different orientation to print properly are rotated to the preferred printing position.
The Nimble Extruder
With an installed weight of less than 27 grams on your carriage/effector the Zesty Nimble is the smallest and lightest extruder you can buy, it has ample torque and can be mounted in multiple orientations.
The Nimble is available from Zesty Technology.