Loading
Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
Nadeon

Anycubic Chiron (V6 & Volcano) double blower fan mount 5015, 40mm fan duct

by Nadeon Feb 5, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

He estado buscando esto pero para E3D v5 y con axial fans :/

jaja bueno. sirve para el v5 (con un cutter) pero justo yo lo que buscaba era mucha presión de aire (y eso sólo lo da el 5015)

A que te refieres con un cutter?...he descargado el bantamount para volcano v6+ y le hace al v5 solo tuve que bajar un poco la base pero la verdad no veo mucha diferencia y tarde mucho en hacerlo, quisiera probar tu versión ya que justo necesito una buena ventilación porque muchos de mis trabajos tienen esos voladizos y ángulos de la muerte.

pues me refiero a que cuando hice el diseño lo hice para que cogiese el cabezal de un V6. el cual tiene tamaño diferente (en altura) en la parte de arriba. A ver si tengo tiempo y modifico la pieza. Es sólo medir y subir de nuevo pero estoy bastante liado

de que forma conectaste los dos blowers de 12v, en serie verdad? alguna recomendación, has tenido algún problema?

Hola, poniendo este mod no se puede poner el autolevel de fabrica no (el del iman)...?
Un saludo y gracias por el mod.

Si, si se puede

Hello, thanks for the great work ! Did you plan to upload files for the belts and sensor ?

Hello :d

would you mind to make the right side air intake to be mirrored, so that the fan can take the air from the outside rather than from the heatsink? thanks for the design:)

although it takes the air from that side. It is very far from the heatsink. In fact if you use the 40mm fan you will see that the heatsink is cold. If I rotated it would cost me to align the air flow well

hello :D

does it fit the stock radiator? because i cant put the stock radiator in :D

I said it was for a V6. Also as soon as I have a little time I go up so that it can be put on a V5

hi, i have modified it for the stock heatsink, with the original steel throat mount, because i had trouble with pla/abs mount that broken when screwed to the carriage. question, where should the air blows? on mine it feels like a portion hit the heatblock, and the rest pointing below the nozzle around 5mm. result was i had so much hairy string.
my retraction setting is 4.8mm distance and 60mms for the speed. lower speed isnt working for me.
Thanks for the great design, and for your helps before! cheers :D

Do you have a link for the mount of the "mini-board" that collects all the signals from the main board?

Just got your mod assembled and trying an overhang test now. Will post pictures when I have cleaned up my cables.

yes! In files "Chiron_plug_holder.stl"

It's wasn't there before, right? Anyway thank you! :)

Comments deleted.

would it be better to use ABS or PETG to print this? which file should i print for 2 fan and stock hotends?

I printed it on pla. but in petg it is surely better. you need all except the hotend fan

So not needed is v6 disipador 40mm? Btw how to do the double fan wiring ( Parallel or serial )? + on + and - on - or +-+-? Thanks a lot :D ive been looking for fan fang design for chiron for cooling part and thia is very awesome :D

If you have a 40mm fan for the best v6 :).
The configuration of fans can be:

  1. 1-24v
  2. 1-12v lowering the voltage.
  3. 2-24v in parallel
  4. 2-12v in series

thanks for the help! :D

¿Sirve esta maravilla en una chiron de serie si no tienes guias lineales?

Si claro. Lo hice para ello.