This is a simple support for Anycubic linear plus heated bed's glass.
It allows you to hold the heated bed firmly in place and attach over it a 240mm glass.
The holes are slotted to allow the supports to adapt easily to the glass.
The glass is easily removable and there are three blocks that hold the glass firmly in place.
- 6 M5x10mm bolt
- 6 M5 Tnut
- 3 M3x15mm hex head bolt
- 3 M3 knobs
(M4 screws and Tnut can also be used instead of M5)
Use a heat-resistant filament to avoid deformation (NO PLA).