Twisted Nespresso Capsule Holder

by iscand Feb 7, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

Could you please help me with slicing options in Cura ?

I assume you need help for printing the column...

I am afraid I never used Cura, but I know it can be done. Maybe this will help you: https://www.instructables.com/id/How-to-Make-a-Vase-With-Cura-31-in-Vase-Mode/

If I remember well, in Cura you do not set the number of layers, rather the total thickness. I would set it to 0.8 mm for both the bottom and outer shells.

'hope this helps...

p.s. If you mange to print it, I'd really love to see your make.

Another question if I may - do you have a recommendation for the infill setting ?

I went down to 5% for the base. I would not recommend going below that, because you might get poor support for the top face where you insert the column. If you set it higher, it will just take longer to print.

For the column you do not need to set it, since it is 0% by default in vase (spiral) mode.

I sure do, will give it a try and get back to you, thanks for getting back to me so soon