I have a tri-stack of Intel Skull Canyon NUCs, running ESXI 6.7. The ability to stack them on top of one another with a little more clearance than I was getting became a necessity.
If pink isn't your thing, print them in red, blue, or whatever color you want! Be sure to post your make.
This BARELY fits on an Ender 3 as long as you turn the skirt off (the little surrounding layer to outline where it goes).
Print settings are below.
RED / PINK
- Layer Height: 0.3 (this can probably vary).
- Initial Layer Height: 0.3 (this can probably vary).
- Wall thickness: 1.0mm (for rigidity)
- Infill Density: 50%
- Build Plate Adhesion Type: NONE (this needs to be set for it to fit on the Ender 3; See screenshot).
WARNING: DO NOT PRINT VERTICALLY. The Skull NUC is pretty wide, I know. I attempted printing this vertically 3 times to just see if I could help those with a bed smaller than an Ender 3 get this accomplished.... unless you want to use 3x as much infill as the actual product, it likely isn't worth the risk. (I'd love for someone to prove me wrong though! Would be awesome).
Designed entirely in Blender. I utilized the Intel autocad models they have available to help make the outline of the ring. :)